GPoS IRC Table

GPoS IRC Table

If you use an End of Day report that includes multiple tills, or you use the PLU Countdown function it is important that the IRC Table is accurate.  These steps 

Step 1 - Log on as a manager

Step 2 - On the Manager Screen, press the IRC Table Button


This will display the current 'table' that is used for the End of Day reports.




Step 4 - Press the 'Retry IRC' button, this will search the network for all tills.

Step 5 - Remove any tills that have 'No Entry' symbols against them by pressing the till to highlight it and then pressing remove. Repeat this for each till

Step 6 - Remove any tills that should not be included in the Retail end of day report (such as Catering Tills) by pressing the till to highlight it and then pressing remove. Repeat this for each till.

Step 7 - Press close.

Repeat this on all POS terminals

    • Related Articles

    • IRC Table

      Step 1 - Log on as a manager Step 2 - On the Manager Screen, press the IRC Table Button This will display the current 'table' that is used for the End of Day reports. Step 4 - Press the 'Retry IRC' button, this will searcht he network for all tills. ...
    • Report Macros & End Periods

      This guide is not intended for End Users to follow Report Macros & End Periods It is possible in GPOS to produce an X or Z report which does not, for example, print the receipt logos or cut the paper if multiple reports are being run. It is also ...
    • System Operation Key Codes

      A system operation is a code that can be entered into the system operation key to achieve a specific task. Certain functions may be beneficial to the end user, and to provide access to these only, it is recommended that a suitable macro for each key ...
    • Z Report - Help and Troubleshooting

      End of Day (Z Read) When your within your Manager screen you can run an End of Day report which will end the period on the till. (Screenshot 1.1) If you click on ‘Z Report’ you will see the following message appear below; (Screenshot 1.2) If you ...
    • Verifone P400 GPoS Setup

      GPoS Setup Peripheral Setup Open GPoS Utility Open  Programming  >  System Tables  >  Peripherals Click or tap on  Add  , and give the Peripheral an appropriate name, eg “ Verifone ”, “ EFT ”, “ P400 ” etc Set the  Peripheral Type  to  Verifone ...