Honeywell Voyager XP 14XX Setup
The Honeywell 1450/1452 and 1470/1472 series scanners can be
programmed by scanning the barcodes found below.
Function
|
Barcode
|
Reset All Defaults
|
|
USB Serial (COM) Emulation
|
|
USB Keyboard Wedge
|
|
Add CR Suffix
|
|
Remove Suffix
|
|
Revision Information - Print out scanner information, best used in keyboard wedge mode.
| |
Turn off presentation mode | |
Turn off sleep mode | |
If you are using the scanner in USB Keyboard Wedge mode, you will
need to add the CR suffix in order for product barcodes to be
scanned and inputted into GPoS. If you are using the scanner in USB
Serial mode, you will need the latest Honeywell Scanning &
Mobility drivers which can be found by clicking
here or on the
Honeywell
Downloads Server.
A Reader Peripheral will also need to be configured in GPoS Utility
with the correct COM port, so that GPoS knows to use this specific
Peripheral for scanning operations. A Reader Peripheral is not
required for a scanner in USB Keyboard Wedge mode, as a scanner in
this mode just passes all data through to the PC or POS terminal to
whichever application is open and in the foreground at the time.
Links to the Quick Start guides for these scanners, which contain
the above barcodes along with additional barcodes for other
functions, are found below:
Related Articles
Honeywell HF680 Setup Guide
Enter/Exit Configuration - Recall Defaults - Defaults are shown with * Operating Modes - Use defaults. No need to change unless the customer says that the IR trigger mode is scanning Barcodes in error. USB Serial - Baud Rate - 115,200 Baud can be ...
Honeywell 1452/1472g Troubleshooting
Points to Check Check that the data cable is plugged in to the base correctly and securely, and that the other end is plugged in to the POS terminal correctly Try cleaning the contacts on the base and the scanner before trying to charge the scanner ...
Reader (Scanner) Rules
This is intended for re-seller use and not for end users. Reader rules are used to tell GPoS how information should be handled when it is received from input devices. These include Magnetic Strip Readers, Barcode Scanners, I-Button Readers etc. You ...
Verifone P400 GPoS Setup
GPoS Setup Peripheral Setup Open GPoS Utility Open Programming > System Tables > Peripherals Click or tap on Add , and give the Peripheral an appropriate name, eg “ Verifone ”, “ EFT ”, “ P400 ” etc Set the Peripheral Type to Verifone ...
GPoS Realtime Communications Setup
GPoS can communicate in realtime with the back office system, posting sales as they are completed and receiving updates as they are created with Total Control Premier's Communications Wizard. A number of System Options need to be set on the GPoS ...