Move a Verifone VX820 from one POS Terminal to another

There are two ways you can swap a PED over, but you'll need to shut down the GPoS software on the till before you do so.

The first is to trace the cable from the PED back to the till, disconnect it and remove the PED and the cable together, then swap the two PEDs over. The second is the easier method, and involves using a small screwdriver to unscrew the back cover of the PED, giving you access to the PED end of the cable:

Disconnect the adaptor, then do the same with the PED that is working. Swap the PEDs by connecting the cable to the replacement PED, then replace the cover.

• Related Articles

• Verifone Pinpad Not Connected

  This article applies to the PAYWare Ocius Sentinel POS client software and the Verifone VX820 pinpad. The "Pinpad Not Connected" error occurs when Ocius Sentinel is unable to detect a connected VX820 terminal. This can occur when a pinpad has been ...

• Contactless floor limits – Mastercard scheme mandate

  What is happening? Mastercard has mandated that from 1st March 2018 all Contactless transactions must now be communicated to your acquiring bank for real-time authorisation, regardless of value. This follows the same process that is already in place ...

• Verifone P400 Overview

  Introduction The P400 terminals are part of the Engage range, which have been introduced by Verifone to replace the VX range, which by the end of 2020 will be retired and discontinued. No additional software is needed, as the terminals communicate ...

• Verifone P400 Troubleshooting

  Check the Network Connection Check the Network Status 1. Press or touch the blue Verifone banner on the screen 2. Press 2 or touch Supervisor (this screenshot is from a non-integrated terminal, and shows Supervisor as option 3 due to the additional ...

• Verifone Status Page

  A page displaying the current status of the Verifone service along with any known Service Notifications: https://www.verifone.com/en/uk/service-notifications