Using Balance Plan to create table plans and room layouts

Using Balance Plan to create table plans and room layouts

Creating a Table Plan using Bal Plan


The Balance Planner is configured and maintained via the balance server of a unit running GPOS.

  1. On your GPOS screen if you click on Bal Plan 


  1. This will take you to the Table planning screen e.g. Balance Plan.


  1. If you click on Plan Maintenance the following screen will appear to use where you can add \ delete tables or add a new floor or removing a floor from your planning.


  1. For example, if you click Add, you will notice a new table appear on the screen, for example, the screenshot below shows a new table called table #1 added to the plan.


  1. If you click on the table, which you can move around the screen and if you look to the bottom right, you can see a general box where you can change the shape or give the table a caption.


  1. On my example, I have called the table ‘Test’ which you will see the text display above the table you’ve added.


  1. If you wanted to click ‘New Floor’ this will allow you to add a new floor and add more tables to your plan.


  1. If you click on the bottom of the arrow left, you can move between floors


  1. If you select the back button will take you back to the main balance planner screen


Extra information

Floors – The balancing plan can contain up to 10 floors, and there is no limit to the number of balances that can be displayed on each floor.




    • Related Articles

    • Error 107: Balance Is Busy

      This occurs when the system believes the table is being held open by a clerk. The first step is to press the table number button which will list any open tables.  It will list the tables and where the system believes the table is held open it will ...
    • Error 7502: Balance Server Error

      If you are seeing a '7502 balance server error' on your terminals. First point of call here is to do some checks; Confirm the till terminal which acts as the balance server is running (one of the tills will be set as the balance server which the ...
    • System Operation Key Codes

      A system operation is a code that can be entered into the system operation key to achieve a specific task. Certain functions may be beneficial to the end user, and to provide access to these only, it is recommended that a suitable macro for each key ...
    • Verifone P400 GPoS Setup

      GPoS Setup Peripheral Setup Open GPoS Utility Open  Programming  >  System Tables  >  Peripherals Click or tap on  Add  , and give the Peripheral an appropriate name, eg “ Verifone ”, “ EFT ”, “ P400 ” etc Set the  Peripheral Type  to  Verifone ...
    • Adjusting and Recharging Customer Balances

      This article applies to Instant CRM version 2.5 and higher - screenshots are taken from Instant CRM version 2.7. Click Customers to open the Customer record list - by default all Customer records are displayed. Adjusting Balances Single Customer ...