How to check pack / Quantity entry options on X3/X4 HHTs.

How to check pack / Quantity entry options on X3/X4 HHTs.

1. First of all you'll need to log into the HHT using the username and password, "999".

2. Once logged in, tap on "Files" and then at the bottom of the screen, tap on "Powered by Exela AutoID Solutions".

3. Once in the setup menu, press next until you reach the page displayed below.



4. From this page, you can change whether you enter by Pack, Quantity or Both for all stock functions. Simply tap the radio button you require for each stock function and once done, click next until you reach a screen that has a "Save" button on it. Tap this and then tap "Exit"


    • Related Articles

    • Barcode settings on Skorpio HHTs

      This guide will show you how to check that the scanner options are set correctly on the Skorpio x3 and X4 HHT units. To start off we will need to load the Decoding applet. This can be found in the control panel. The control panel is accessed by ...

    • System Operation Key Codes

      A system operation is a code that can be entered into the system operation key to achieve a specific task. Certain functions may be beneficial to the end user, and to provide access to these only, it is recommended that a suitable macro for each key ...

    • How to increase max item multiplier on GPOS

      This guide will show you how to increase the maximum quantity of items to be sold. Firstly you should navigate to your end-of-day/manager screen and shut down GPOS. Once you have completed the above task please navigate to the Fidelity GPOS Utility ...

    • Top X Selling Products (How to Use)

      Reporting Showing Top X Selling Products Select Reporting from the side menu Select New Report Wizard Expand the category product sales and expand the subcategory product sales again followed by choosing the "Product Report (without grouping)" Select ...

    • GPoS Realtime Communications Setup

      GPoS can communicate in realtime with the back office system, posting sales as they are completed and receiving updates as they are created with Total Control Premier's Communications Wizard. A number of System Options need to be set on the GPoS ...