Operation code | Name | Notes |
1000 | Remove all tax shifts from current transaction | Executing these operations will search the current transaction for any tax shifts that might be in play and remove the appropriate shift data. In the case of 1000, all shift data is erased |
1001~1032 | Remove tax shift 1 status from current transaction | |
1237890 | Reset Kappture | When executed, GPoS will disconnect from the Kappture subsystem, and re-initialise / connect. |
2525252 | Set age requirements of transaction to 'met' | If the system is configured to be self-service using YesPay system option # 13 (age restriction) works in a different way; it will warn of the restriction, and let you carry on scanning goods, but will not let you finalise the transaction until this system operation has been executed. |
6666660 | Encode this PoS with a dealer PIN | This operation encodes the Dealer PIN into to the security files on GPoS. It is used in conjunction with configuring an evaluation mode. The pin must match the pin used on the ‘usage time setter’ utility as codes are encrypted using the pin (so as not to allow other Dealers to reset the clients evaluation). In the case of replacing an existing pin, you must key in the old pin before you can change to the new one. |
6666661 | Enter Evaluation code | Provides a UI to enter the digit sequence provided by the dealer when resetting the evaluation time. Once the code is entered, it is decrypted and an extension to the usage period is added. |
6666662 | Disable evaluation mode | Removes evaluation mode completely. Dealer pin entry is required to operate this. |
7777777 | Remove Service charge from the current transaction | When executed, will disable the service charge for the current transaction (used when utilising auto service charge) |
8118118 | Remove any customer account association with the current transaction | When executed, the current transaction will be disassociated with any customer account, allowing the transaction to assign a new account if required. |
8128100 | sQuid fetch RPU's for current card | sQuid cashless system: Will contact the sQuid servers and fetch any RPU’s (remote point updates) that might need adding to the card. |
8128101 | sQuid Synch with sQuid host | sQuid cashless system: Synchronises the PoS with sQuids servers. When GPoS initializes the sQuid subsystem, the subsystem will from time to time execute this operation in the background. This is an ideal comms test to ensure that the correct ports are opened to sQuid. |
8128102 | sQuid take EOD report | sQuid cashless system: This operation asks the sQuid subsystem for details of what its totals are. |
8888881 | Send Ocius Offline Submission command | Verifone Ocius for PC / Sentinel specific commands. When using the Verifone system for eft transactions, these operations should be provided as buttons (using macro’s), with all users having access to the reprint receipt functionality. These operations do not provide UI feedback by default (the command is sent, and GPoS carries on). If a UI cue is required, substitute the first 8 with a 1 in the code, and GPoS will then display a dialog once the code has been sent. |
8888882 | Send Ocius Request Z | |
8888883 | Send Ocius Request X | |
8888884 | Send Ocius Request TXN report | |
8888885 | Send Ocius Request Stored TXN report | |
8888886 | Send Ocius Request - reprint last customer receipt | |
8888887 | Send Ocius Request - reprint last merchant receipt | |
Available on Request | Sales data clear (and counter reset) | This destructive code removes all transactions from both the main store and the archive, and resets all report counters back to 0 |
Available on Request | Clear Balance Buffer | This operation effectively clears out the balanceserv table in the database, removing all ongoing table / layaway / internal room transactions. A backup should be taken before executing this. |
Available on Request | Clear Clerk Buffer | This operation clears any ongoing clerk transactions that might be stored on the clerk server. This operation has no effect if run on a machine not acting as a clerk server. |
Available on Request | Release busy status on all balances | This operation removes the lock flag from each balance so that all balances can then be opened again. IMPORTANT: before running this operation, you need to be 100% sure no other PoS unit is currently operating on a balance as this will cause unpredictable results. |
9961214 | Reset clerk server status | In the event of the clerk server(s) being marked as bad (down), executing this operation will reset the flag – allowing the unit to attempt communications again. |
9961215 | Reset balance server status | In the event of the balance server(s) being marked as bad (down), executing this operation will reset the flag – allowing the unit to attempt communications again. |
9961216 | Backup db to folder mentioned in option #209 | Takes an immediate backup of the GPoS database and attempts to store it in the location mentioned in system option #209. Please ensure that SQL server has sufficient access rights to enable writing to the designated folder. |
9961217 | Display software serial number | Displays the serial number that was used to register this copy of GPoS |
9961218 | Delete all archived data | When executed, the system will remove all data stored in archive tables immediately. |
9961219 | Truncate Database log file | When executed, SQL server marks the database as ‘up to date’, and removes transaction log data prior to the event. |
Available on Request | Reset order number | Resets the order number to the default in the system options |
9961221 | Reset all PLU's countdown / stock values to 0 | Clears the countdown field on all PLU’s |
9961224 | Check for orphaned Balances | When executed on a client PoS, GPoS will allow balances that were performed whilst the server was offline, to be re-introduced back to the balance server. |
9991222 | Delete all PLU's | Wipes the PLU file completely. |
9999966 | Set CNP flag (telephone order) | Verifone: Marks the transaction as a ‘CNP (card holder not present) Telephone order’ transaction. Subsequent use of the eft key in the transaction will result in Verifone asking for details manually (i.e. card number, cvv code, e.t.c) |
9999992 | Dump multibuy workarea to disk | Immediately writes the contents of the current transactions multibuy work area to disk, showing Multibuys that have triggered, and Multibuys that may be about to trigger. |
9999993 | Reload cached tables | When executed, GPoS will re-load cached data from the database. Tables such as screen layouts, payment keys, macros, Multibuys, etc. are cached in memory to enable quick retrieval of information. If this operation is executed during a transaction, it has no effect. |
9999994 | Manually start the archive process | Starts the archiver thread immediately. |
9999995 | Dump information about the system to disk | When executed, GPoS collects information about the OS and the running environment and then writes this to file. |
9999996 | Set CNP flag (mail order) | Verifone: Marks the transaction as a ‘CNP (card holder not present) Mail order’ transaction. Subsequent use of the eft key in the transaction will result in Verifone asking for details manually (i.e. card number, cvv code, e.t.c) |
9999997 | Reset any CNP flag in the current transaction | Verifone: removes any current CNP flag that is currently set on the transaction. If the eft key is then used, it will ask the user to insert / swipe card as normal. |
9999998 | Force gpos to check for shift ends | Executing this operation will force gpos to check all clerks to see if their shift has ended (based on their clock in time), and if so, will auto end the shift as required |
9999999 | Check DB usage | Reports to screen the percentage used of the database. |