Aures EFT COM Settings

Aures EFT COM Settings

Open Device Manager in Control Panel, then double-click on the Communications Port (COMXX) that the EFT is connected to.

On the Port Settings tab, change the Bits per second value to match the value shown when setting up the Pinpad connection in Ocius Sentinel (by default this is 115200), and then click on OK.

Click on the Advanced button, set the Receive Buffer value to 4 (8 for Yuno terminals), and then click on OK.

Note that this is not needed if the BIOS has been updated on a Yuno.
    • Related Articles

    • Receipt Printout Showing Random Garbage Data

      Screenshots are taken from GPoS version 1.66. If receipt prints are coming out as blocks of random garbage characters, there might be a mismatch between the printer Peripheral settings in GPoS, and the settings on the printer itself. Receipt Printer ...
    • Verifone Pinpad Not Connected

      This article applies to the PAYWare Ocius Sentinel POS client software and the Verifone VX820 pinpad. The "Pinpad Not Connected" error occurs when Ocius Sentinel is unable to detect a connected VX820 terminal. This can occur when a pinpad has been ...
    • POS Printer Errors and Fault Finding

      Printers- Errors and fault finding Receipt Printers The first thing to identify is whether it is a printer hardware fault or an issue within GPoS. To identify if it is an issue within GPoS, try a receipt print or identify which GPoS error message you ...
    • Verifone Unexpected Pinpad Attached

      The "Unexpected Pinpad Attached" Error occurs when Ocius Sentinel is unable to validate the pinpad online with Verifone. This is usually the result of the software being unable to communicate with Verifone's servers, such as in the event of a dropped ...
    • Setting Scanners to be in USB Serial Emulation mode

      Scanners can be operated in USB Serial Emulation mode, which means that the scanner connects to the POS terminal as a virtual serial device. This can be done either with a utility provided by the manufacturer, or by scanning programming barcodes. ...