HHT X4 - Obtaining the IP address and MAC Address

I have been instructed that I need to provide my current IP address and MAC address of my Skorpio X4 Device.

Double tap the network icon, this is represented as two computer screens, it will then display the same screen as shown below.

If you now proceed to tap on the Stats tab (1) at the top and you will need to scoll the slider bar (2) to right to obtain the full IP and MAC address (3).

• Related Articles

• HHT Auto Off

  This article applies to Skorpio X3 and X4 terminals. Screenshots are taken from the Fidelity HHT application version 3.0.4 running on a Skorpio X4. By default on older HHTs, the power saving function can get in the way of the Fidelity HHT application ...

• Resetting A Skorpio HHT

  This article applies to the Datalogic Skorpio X3 and X4. Pictures are of the Skorpio X4. If the HHT has got itself into a frozen or crashed state, and has stopped responding or is not behaving correctly, resetting the terminal can more often than not ...

• Connecting HHT to WiFi

  These instructions will guide you through connecting an X4 HHT to the Wi-Fi. Firstly click the network icon on the task bar on the bottom right. This may look like the below screenshot or if you are not on the wifi it may have a red X through it. ...

• Skorpio HHT Docks & Modules

  Skorpio X3/X4 Dock The Skorpio X3/X4 Dock charges the battery of the Skorpio, both whilst the battery is connected to the terminal and the terminal is inserted into the dock, and also on its own in a separate slot at the back of the dock. The dock ...

• HHT Software Version

  This article is intended to be followed when a Fidelity Support Representative ask you for the version of the HHT Software / Application loaded onto a Skorpio HHT To find the Serial Number, Model, or Firmware version of the HHT follow this guide - ...