IRC Table

IRC Table

Step 1 - Log on as a manager

Step 2 - On the Manager Screen, press the IRC Table Button


This will display the current 'table' that is used for the End of Day reports.




Step 4 - Press the 'Retry IRC' button, this will searcht he network for all tills.

Step 5 - Remove any tills that have 'No Entry' symbols against them (should be a Till 1 in this state) by pressing the till to highlight it and then pressing remove. Repeat this for each till

Step 6 - Remove any tills that should not be included in the Retail end of day report (such as Catering Tills) by pressing the till to highlight it and then pressing remove. Repeat this for each till.

Step 7 - Press close.

    • Related Articles

    • GPoS IRC Table

      If you use an End of Day report that includes multiple tills, or you use the PLU Countdown function it is important that the IRC Table is accurate.  These steps  Step 1 - Log on as a manager Step 2 - On the Manager Screen, press the IRC Table Button ...

    • Using Balance Plan to create table plans and room layouts

      Creating a Table Plan using Bal Plan The Balance Planner is configured and maintained via the balance server of a unit running GPOS. On your GPOS screen if you click on Bal Plan  This will take you to the Table planning screen e.g. Balance Plan. If ...

    • Report Macros & End Periods

      This guide is not intended for End Users to follow Report Macros & End Periods It is possible in GPOS to produce an X or Z report which does not, for example, print the receipt logos or cut the paper if multiple reports are being run. It is also ...

    • GPoS Release Notes

      Pre-Requisites and Integrations Known Issues GPoS Version v1.67.8896.16668 (Supporting DB Version 167) Type Name Description Fix GPoS -Multiple Retries of Blacklisted Transactions Transactions that have been blacklisted and re-tried 30 times. Code ...

    • Time and Attendance

      In order to use time and attendance, you must first ensure you have suitable shifts setup.  These records relate to the shifts a member of staff works, and you can set the standard amount of working hours within a shift.    The shift information is ...