Skorpio HHT not connecting to Wifi

Skorpio HHT not connecting to Wifi

To do a warm reboot press and hold the yellow and blue buttons at the same time. Whilst pressing these also press the ESC button.

The device will then go off and come straight back on

    • Related Articles

    • Connecting HHT to WiFi

      These instructions will guide you through connecting an X4 HHT to the Wi-Fi. Firstly click the network icon on the task bar on the bottom right. This may look like the below screenshot or if you are not on the wifi it may have a red X through it. ...

    • Resetting A Skorpio HHT

      This article applies to the Datalogic Skorpio X3 and X4. Pictures are of the Skorpio X4. If the HHT has got itself into a frozen or crashed state, and has stopped responding or is not behaving correctly, resetting the terminal can more often than not ...

    • Skorpio HHT - How to find device info?

      This article is intended to be followed when a Fidelity Support Representative ask you for information such as the Serial Number, Model, or Firmware version of the HHT To find the HHT software version follow this guide - HHT Software Version Step 1 ...

    • MISCommunicator Not Active

      This article applies to the Fidelity HHT application version 2 and higher. Screenshots are taken from the Fidelity HHT application version 3.0.4 running on a Skorpio X4. The "MISCommunicator Not Active" error (or "MISCommunicator Not Active, or ...

    • HHT Label queue update instructions.

      Please note: This guide is for Version 3 and above of the HHT software. Sign on to the HHT with the user: 999 and the password: 999 Click on the menu – ‘FILES’ In the Files menu tap the words ‘Powered by Exela AutoID Solutions’ You should now see the ...