HHT Label queue update instructions.
Please note: This guide is for Version 3 and above of the HHT software.
Sign on to the HHT with the user: 999 and the password: 999
Click on the menu – ‘FILES’
In the Files menu tap the words ‘Powered by Exela AutoID Solutions’
You should now see the screen above, Press ‘Next’ 6 times until you see the following screen:
Tap ‘Refresh Queue’ – Wait for list to refresh.
Tap ‘Save Queue’ – This saves the updated label queue
Tap ‘Save’
Tap ‘Exit’
Tap ‘Back’
Tap ‘Logout-999’
The HHT will now display the updated label queue.
Related Articles
HHT X3X4 Software Update Guide V6.0.0A
HHT X3/X4 Software Update Guide HHT X3/X4 SOFTWARE UPDATE GUIDE V6.0.0 This document has been written as a guide to aid you in the updating of the HHT Software Contents Pre-Update Check list Step 1: Shutdown Software Step 2: Running the Upgrader Step ...HHT X5 Software Update Guide V6.0.0A
HHT X5 Software Update Guide HHT X5 SOFTWARE UPDATE GUIDE V6.0.0A This document has been written as a guide to aid you in the updating of the HHT Software Contents Pre-Update Check list Step 1: Shutdown Software Step 2: Running the Upgrader Step 3: ...Total Control Label Printing
Label Printing Options Total Control Premier has 4 options for producing labels however only two are available to use. Our recommended method is to use the Bartender Solution Label Devices Device Type Bartender Uses a 3rd party application allowing ...Label Queues (How to use)
How to Add PLUs into your Label Queue If you go into ‘Daily Tasks’ and select ‘Label Manager’ from the menu. This will open in a new tab as below; To add to the queue, if you highlight your queue as follows; If you double click on the queue name ...Connecting HHT to WiFi
These instructions will guide you through connecting an X4 HHT to the Wi-Fi. Firstly click the network icon on the task bar on the bottom right. This may look like the below screenshot or if you are not on the wifi it may have a red X through it. ...