The following video will guide you through accessing device settings on the Skorpio X5 / Memor K for updating things such as regional settings and wifi.
Open Device Manager in Control Panel, then double-click on the Communications Port (COMXX) that the EFT is connected to. On the Port Settings tab, change the Bits per second value to match the value shown when setting up the Pinpad connection in ...
This guide will show you how to check that the scanner options are set correctly on the Skorpio x3 and X4 HHT units. To start off we will need to load the Decoding applet. This can be found in the control panel. The control panel is accessed by ...
This article is intended to be followed when a Fidelity Support Representative ask you for information such as the Serial Number, Model, or Firmware version of the HHT To find the HHT software version follow this guide - HHT Software Version Step 1 ...
To do a warm reboot press and hold the yellow and blue buttons at the same time. Whilst pressing these also press the ESC button. The device will then go off and come straight back on
Skorpio X3/X4 Dock The Skorpio X3/X4 Dock charges the battery of the Skorpio, both whilst the battery is connected to the terminal and the terminal is inserted into the dock, and also on its own in a separate slot at the back of the dock. The dock ...